+- تالار گفتگوی تخصصی مهندسی و بازرسی جوش (https://www.weldeng.net/MyBB)
+-- انجمن: طراحی جوش (/Forum-%D8%B7%D8%B1%D8%A7%D8%AD%DB%8C-%D8%AC%D9%88%D8%B4)
+--- انجمن: طرح اتصال و لبه سازی (/Forum-%D8%B7%D8%B1%D8%AD-%D8%A7%D8%AA%D8%B5%D8%A7%D9%84-%D9%88-%D9%84%D8%A8%D9%87-%D8%B3%D8%A7%D8%B2%DB%8C)
+--- موضوع: Introduction of the components of the film blowing machine (/Thread-Introduction-of-the-components-of-the-film-blowing-machine)
Introduction of the components of the film blowing machine - hk669ww - ۱۴۰۰/۱۱/۶ ۰۸:۱۲ صبح
Blow Membrane is a plastic processing method, which refers to a plastic processing technology in which plastic particles are heated and melted and then blown into a film. Usually, the polymer is extruded to form a tubular film blank, which flows in a better melt flow. In the state, the tube film is blown to the required thickness by high-pressure air, and it becomes a film after being cooled and shaped. The quality of the film material blown by this process is related to the film blowing machine and plastic particles. Film blowing machine is a machine that heats and blows plastic particles into plastic film. Theدیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
has the advantages of simple structure, low investment, and quick product effect; high mechanical properties of the film; no edge material and less waste; the film product is cylindrical and the bag-making process is simple; it can produce a wide film.
The separation type screw divides the melting section into a solid bed and a melt bed. The width and depth of the solid bed gradually become smaller, and the width and depth of the melt bed gradually become larger, and finally become the width and depth of the metering section.1. Feed zone.The volume of the screw groove in the feeding section remains unchanged. The material is in a solid state, and the main purpose is to transport the material forward as soon as possible.2. Melting zone. The volume of the screw groove in the compression section gradually decreases. The material changes from solid to molten. The main purpose of the material is to change from solid to molten.3. Melt pumping zone.The volume of the screw groove in the metering section remains unchanged. The material is completely in a molten state, and the main purpose is to make the material fully plasticized and send the material to the machine head at a fixed amount and pressure.
The cooling method of دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
can be divided into two types: external cooling and internal cooling.
1. The external cooling method is the earliest application method. Under the action of the cooling ring, cooling air is released from a circular ring along the extrusion direction and the outer surface of the bubble to generate uniform cooling air around the ring. Inside the cooling ring, the air at the upper port is discharged at a faster average speed than that on the lower port. It is ensured that the shape of the film bubble is consistent with that of the air cooling ring, so that the average flow velocity of the air increases and thus the heat transfer is improved.
2. The internal cooling directly dissipates heat through the film bubble for cooling purposes. Because the flow rate of the air in the bubble is relatively low and has no regularity, external cooling is more widely used in the market. In the blowing process of the film blowing machine, in order to ensure the quality of the film product, the stability of the film bubble before the film is formed must be considered in order to effectively control the product qualification rate. The output of blown film of the film blowing machine is not only restricted by the film bubble, but also the cooling system of the film blowing machine. A complete cooling system can help the دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
work and run rationally.
With the rapid development of industrial technology, the film blowing machine has mastered the skilled production process, but compared with the more advanced technology level in foreign countries, there are still some gaps in some aspects, in order to obtain the development of the film blowing machine. In order to enter the international market, we must let the film blowing machine develop in a new direction.
A special plastic wrap blown by the film blowing machine, using advanced technology to make fruits and vegetables durable. The cling film is composed of a transparent film of a nylon semi-packaging machine. The film is nearly transparent and has good water permeability. A certain amount of sand syrup is placed in the interlayer to gently wrap the surface of the article. The film must be environmentally friendly. It is harmless and has strong water permeability. It can absorb fruit and vegetable juice to achieve fresh-keeping purpose. This special raw material requires high-end traction and drawing ability of the دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
to ensure the toughness and breathability of the product film. Food packaging is the most used film. In the field, the high-grade film blown out by the film blowing machine can be used as a commodity packaging promotion to enhance commercial value.
At present, the popular packaging on the market is mainly plastic and paper. The blow molding industry mainly based on plastic blown film machine has a large proportion in the market, but with the stricter requirements on the paper industry, the new environmental protection and energy saving The indicators have raised the threshold for the paper industry, resulting in an increase in the cost of the paper packaging market and rising prices. This has led to a corresponding increase in the market share of plastic packaging, stimulating the development of the film blowing machine manufacturing machinery industry, while environmental protection and energy saving technology has been paid attention to in the film blowing machine machinery industry, promoting the blown film machine to the high level.
In the future, as technology continues to deepen, the film blowing machine will continue to be upgraded and will play a more important role in promoting the plastics and packaging industry to the high end. China is a large manufacturing country with an advantage in scale. However, in the research and development and commissioning of high-end equipment, domestic plastic machines have not yet reached the international level. Domestic blown film machine relies on huge consumer groups, and the market prospect is promising, but the development towards high-end is the development trend that blown film machines must face.
Film blowing machine blown out of the film is usually used for goods transport, food packaging, product preservation, biotechnology and other industries, the quality of film blowing machine and blowing
Film technology determines the quality of film forming. So a good performance of the film blowing machine in the production of film process shows a good market adaptation
Ability to improve production efficiency while providing convenience for people to promote harmonious development of society.
Food packaging is the most widely used field of film, film blowing machine blown out of the high-grade film can be used as a commodity packaging publicity, improve commercial value. Today,
Film blowing machine development of high-end technology, film blowing can also be used as a number of applications such as food preservation technology, take the road of new film blowing machinery manufacturing. Blown film
Machine blown out of a special plastic wrap, the use of advanced technology, so that fruits and vegetables long - lasting.
The plastic wrap is made up of a nylon translucent film, which is nearly transparent and permeable, and is filled with a certain amount of sand syrup, gently wrap the surface of the article, this film must ensure environmental protection and harmless, at the same time has a strong water permeability, can absorb fruit and vegetable juice, to protect
Fresh purpose. This special material requires the دیدن لینک ها برای شما امکان پذیر نیست. لطفا ثبت نام کنید یا وارد حساب خود شوید تا بتوانید لینک ها را ببینید.
with high-end traction and wire drawing ability, to ensure the product film tough breathable.
A foreign company USES plastic film blowing mechanism to produce a new type of polyethylene film, this film is used in agricultural pesticide, not only can
They don't go bad, they don't get eroded by outside gases, and they're these amazing membranes that in addition to being able to store pesticides, they dissolve in water
And can draw patterns on the surface of the film. Blowing film driven by film blowing machine brings so much convenience to food processing and commodity packaging.
With the deepening of science and technology, the film blowing machine after continuous upgrading, will play a more role in promoting the plastic and packaging industry to the high-end Come in.This article outlines the essential features and parts that comprise Pp High-Speed Film Blowing Machine. high-speed film blowing machine Pp as well as the operation that the equipment performs.
Are you interested in purchasing an equipment that will allow you the production of polyethylene film-like plastic? It can increase your company’s profitability and generate more money. If you are interested, purchase the top-quality film blowing machine.
Numerous companies are providing this kind model of equipment for their customers. Numerous business and private individuals in this business are purchasing this type of machine. Particularly within the United States, many are employing this equipment. Therefore, it is recommended to be aware of Pp High-Speed Film Blowing Machine. HP High-Speed Film Blowing machine.
What is the Machine?This machine was specifically developed to produce PP that is Polypropylene film. The film is highly clear and high transparency. The film comes with a number of technological attributes. For instance, the machine is able to use ten sets of water rings. The water rings assist in the production for the films.
It also assists users to create various sizes of film products. Another aspect this machine performs involves manufacturing film production. To do this, a circular die shape is used to make the films. To make the film, the pressure of air is essential. The pressure of air is utilized to increase the thickness of the film.
ALSO READ What Makes a Laptop Military Grade?The Basic Nature of the Pp High-Speed Film Blowing MachineThe machine is made up of many components. It includes, for instance, the motor, screw barrel, inverter, tower, head and winder. For better efficiency in the working process it has frequencies control elements that can increase speeds of motors.
ALSO READ Toys R US 2021 Black Friday Toys R Us 2021 Black FridayThe speed of the motors assists in controlling the machine’s speed and help to save energy. The alloy of chromium-aluminium-nitrogen is used to construct its barrel and screw.
What is it and how does it work?There are a few steps of the machine’s work. The polymer is first dissolved in Pettet that is melted within the liquid that is viscous. The barrels and the screws work as an extruder in the High-Speed Pp Film Blowing Machine. The thick liquid permits the polymer to form shapes through dies or tubes.
Thirdly, the pipe has to be filled with air for safe rupture in a bubble by injecting by air. Fourthly the bubble is chilled by its cooling system. Fifthly, on its external surface the air ring can be utilized to help in the solidification of the material.
The frames are split in two by collapsing processes. Sixthly, following this procedure, the layers are formed into two-layered plastic films. Then , a circular roll is made to pack items. Seventhly, the procedure is in accordance with the specifications of machines’ models.
The Bubble InstabilitiesWhen making films using the the the Pp high-speed Film Blowing Machine ,there is a possibility of bubble instability at the time of production. It is therefore necessary to be cleared to allow uninterrupted production. Since it causes the product to be in a variety of unstable and deforms in various ways, many different bubbles instability could arise, such as frozen line-height instability breath, bubble flutter draw resonance, tear of the bubble and helical instability. When it comes to time of production, it makes certain that the bubble’s instability doesn’t cause problems. So, it isn’t possible to cause the issues at the time of production.